Hardware Setup
13
Jumper Settings
RTC – CMOS RAM Clear Selector
The battery on this mainboard is designed to retain
system configuration in CMOS RAM. In order to save
the battery, the jumper is set on “Clear CMOS”
position when this board is shipped; therefore, you need
to set this jumper to “Normal” position before setting
other jumpers or memory modules.
+
Chipset
Sound
VGA
Chipset
RTC
RTC
Description RTC
Clear COMS
Normal
Note:
1. This jumper needs to be set on Normal
mode before using.
2. Turn off the system and unplug the power cord when
you clear the CMOS.