Step 4:
After installing CPU card into the retention Holder, push
the retention locker downward to secure the CPU card
as indicated in the following 2 drawings.
Hardware Configuration
11
CPU Speed Setting
This mainboard provides CPU Plug and Play technology,
so that there is no need to set the CPU jumper. Enter the
BIOS Setup and select CPU Plug and Play Setup. Choose
the correct CPU speed to match your installed CPU.
However, if you need to change a CPU, follow the below
steps:
1.
Power off the system and unplug the power cord.
2.
Install a new CPU to Slot1.
3.
Clear CMOS RAM (see Jumper Settings) then power
on the system.
4.
After the power is on, enter the BIOS Setup to set the
new CPU speed.
Note: If the CPU speed is set incorrectly it'll fail to boot
up the system. If this happends repeat steps 1, 3, and 4.