Matrox maevex series, Руководство пользователя

Страница: 21 / 32

Matrox Maevex Series – User Guide 21
Size and transformations defines how the local output displays video.
If you want to use a specific display mode, enable
Force display mode
and specify which
mode to use with your monitor.
Select how the image is shown on the output. Possible values are:
ƒ
Center image in display
– the video is shown in the center of the display. No scaling
is done to the image. Black border may appear around your video.
ƒ
Fill display
– The video is scaled to fit the entire display area. If the display area has
a different aspect ratio than the display area, the image may be distorted.
ƒ
Fit image in display
– The video is scaled to fit the display area without distorting the
image. If the display area has a different aspect ratio than the display area, black
borders appear either above and below or on each side of your video.
Image appearance allows you to adjust the video output of your unit.
ƒ
Brightness
– how light or dark all the colors appear. Value ranges from 0 to 10000.
ƒ
Contrast
– the difference in brightness between the lightest and darkest colors. Value
ranges from 0 to 10000.
ƒ
Hue
– the tint or tone of colors. Value is in degrees and varies from -180 to 180.
ƒ
Saturation
– the color depth. A higher saturation gives more vivid colors. Value
ranges from 0 to 10000.
Audio – the volume for the HDMI and analog channels of your unit. If audio is used on
the HDMI channel, the analog channel is disabled.
Network –
Select how to assign an IP address to your unit. By default, the IP address is assigned through
DHCP. You can also assign the IP address of your unit manually.
Preliminary
–
Engineering
samples