Matrox 4Sight EV6, Установка и справочник по оборудованию

Страница: 11 / 116

Matrox Imaging software 11
The Microsoft operating system and associated software was designed for systems
that do not require fail-safe performance. You may not use the Microsoft operating
system and associated software in any device or system in which a malfunction of
the software would result in foreseeable risk of injury or death to any person. This
includes operation of nuclear facilities, aircraft navigation or communication
systems, and air traffic control.
Matrox Imaging software
Matrox 4Sight EV6 can be used with one or more Matrox Imaging software
products that support the unit. These are the Matrox Imaging Library (MIL) and
its derivatives (for example, MIL-Lite, Matrox Capture Assistant, and Matrox
Design Assistant). All Matrox software is supported under the version of Windows
installed on your unit.
Matrox Design
Assistant
The Matrox Design Assistant package is a flowchart-based, Windows program
that integrates a development environment for Matrox 4Sight EV6. It allows you
to create an imaging application without writing a single line of code. Application
development is visually a step-by-step approach, where each step is taken from an
existing toolbox and is configured through a series of dialog windows. An
application developed with Matrox Design Assistant can be deployed locally (on
the same computer as that used for application development) or remotely. Once
the project is built and deployed, it can run without the Matrox Design Assistant
interface being installed.
With Matrox Design Assistant, you can:
• Create your project as a series of steps using a flowchart.
• Test your project from your computer without any additional code editors or
compilers and without deploying (copying and running) your project on the target
computer (for example, Matrox 4Sight EV6).
• Design and layout a web page (operator view) to receive operator input and to
display your project's output.
• Run, terminate, and re-run the project on your target computer from within
Matrox Design Assistant.