manualshive.com logo in svg

Matrix U3X-05, Руководство по обслуживанию

Поделиться
Скачать
Matrix U3X-05 Скачать руководство пользователя страница 33

30

1. If you have status lights on the TV, but the On  / Off button gives no response, disconnect and then re-connect the power to the treadmill from 

the wall.  Attempt to turn on the TV again using the On / Off button.  

2. If the TV does not power on check the TV keypad connection at the console (Figure A).  

3. Also check the connection of the TV controller wire at the TV (Figure B) and the console (Figure C).  

4. If the TV does not power on with the TV keypad, attempt to power on the TV using the small handheld remote that came with the TV (Figure D) 

(Used for changing menu and other settings).  If the TV will function with the handheld remote, replace the TV keypad.  If the TV will not function 

with handheld remote it is likely an issue with the TV itself, contact Matrix Customer Technical Support.  

8.16 ENTERTAINMENT TROUBLESHOOTING - CONTROLLER ISSUES

FIGURE A

FIGURE B

FIGURE D

FIGURE C

CHAPTER 8: TROUBLESHOOTING

Содержание U3X-05











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды