Matrix T5X-02, Руководство по обслуживанию

Страница: 8 / 69

4
for your safety and to ensure good treadmill performance, the ground on this
circuit must be non-looped. Please refer to NeC article 210-21 and 210-23. your
treadmill is provided with a power cord with a plug listed below and requires
the listed outlet. any alterations of this power cord could void all warranties
of this product..
CHaPTer 2: imPorTaNT SafeTy iNSTrUCTioNS
maTrix dediCaTed CirCUiT/eleCTriCal reQUiremeNT iNfo
all matrix treadmills require the use of a 20 amp “dedicated circuit,” with a
non-looped (isolated) neutral/ground, for the power requirement. Quite
simply this means that each outlet you plug your treadmill into should
not have anything else running on that same circuit. The easiest way
to verify this is to locate the main circuit breaker box, and turn off the
breaker(s) one at a time. once a breaker has been turned off, the only
thing that should not have power to it is the treadmill. No lamps, vending
machines, fans, sound systems, or any other item should lose power
when you perform this test.
Non-looped (isolated) neutral/grounding means that each circuit must
have an individual neutral/ground connection coming from it, and
terminating at an approved earth ground. you cannot “jumper” a single
neutral/ground from one circuit to the next.
in addition to the dedicated circuit requirement, the proper gauge wire
must be used from the circuit breaker box, to each outlet that will have
the maximum number of units running off of it. if the distance from the
circuit breaker box, to each outlet, is 100 ft or less, then 12 gauge wire
may be used. for any distance greater than 100 ft from the circuit breaker
box to the outlet, 10 gauge wire must be used.
2.4 eleCTriCal reQUiremeNTS
120 NEMA 5-20R
120 NEMA 5-20R
220 NEMA 6-20R 220 NEMA 6-20R