Matrix T-DPT, Руководство пользователя

Страница: 18 / 20

18
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Clean entire machine using water and a
mild soap or other Matrix approved solution
(cleaning agents should be alcohol and
ammonia free).
DAILY
Check harness for wear and secure
connections.
DAILY
Remove the front cover. Check for debris and
clean with a dry cloth or small vacuum nozzle.
MONTHLY
Lubricate treadmill running deck EVERY 3 MONTHS
Check sled brake band for wear and proper
tension.
EVERY 6 MONTHS
Replace sled brake band. EVERY 300 HOURS
MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or
has worn or broken parts. Use only replacement parts
supplied by your country’s local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable
or missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing
maintenance or repair of any kind is qualified to do so.
MATRIX dealers will provide service and maintenance
training at our corporate facility upon request.
LUBRICATING THE RUNNING BELT
1. Using a T-wrench or Allen wrench, loosen
the rear roller bolts 10-15 counter-
clockwise turns. This should give the
belt enough slack for you to lift it.
2. Lift the belt as far as you can and squirt
the silicone oil in a zigzag pattern across
the entire running deck surface. Use 30-
50 ml of 100% silicone oil lubricant. Do not
apply the silicone oil on top of the running
belt. Lay the running belt down and then
tighten both rear roller bolts clockwise
the same number of turns loosened.
3. Walk on the machine at a comfortable
speed for 3 minutes to spread the
silicone and to check the running belt
for proper tension and alignment.
4. Wipe any excess oil from the
sides with a damp cloth.
RUNNING
BELT
RUNNING
DECK
ENGLISH
SLED BRAKE TENSION
1. Set the left sled brake to Level 8
(maximum) and the right speed
brake to Level 1 (minimum).
2. Remove the flywheel cover (and the
flywheel if needed) in order to gain access
to the spring on the resistance band.
3. Measure the spring length. The length
should be between 50.5–51.5 mm.
4. If the spring length is out of range,
turn the eye hook bolt to adjust
the spring length accordingly.
5. Reassemble and test the unit.
3
4
50.5 – 51.5 mm