Matrix S7X-01, Руководство по обслуживанию, Страница: 65 / 79

61
9.20 peDAl ArM replACeMeNt
1) Remove the shrouds as outlined in Section 9.11.
2) Remove the pedal as outlined in Section 9.18.
3) Disconnect the pedal belt beneath the pedal frame by removing the 2 screws on the pedal retension bracket (Figure A).
4) This will allow you to remove the belt from the pedal frame (Figure B).
5) Remove the snap ring holding the pedal arm to the frame (Figure C).
6) Remove the pedal arm (Figure D).
7) Reverse Steps 1-6 to install a new pedal arm.
8) Test the stepper for function as outlined in Section 9.22.
fIgUre A
fIgUre b
fIgUre C
fIgUre D
CHApter 9: pArt replACeMeNt gUIDe