9
5.1 TenSion conTrol rePlacemenT
- conTinUeD
6) Put down the arm rest set (Figure G).
7) Remove the 2 screws holding tension control from arm rest set (Figure H).
8) Remove tension control from arm rest set (Figure I).
9) When you install the new tension control, make sure the tension control level is at the highest level and tie the wire at tension control wire
end. Please refer to the figure J & K.
fiGUre G
fiGUre H
fiGUre i
fiGUre j
fiGUre k
cHaPTer 5: ParTS rePlacemenT GUiDe
