Matrix MR111SS, Руководство по установке, использованию и обслуживанию

Страница: 10 / 32

10
Igniting the burners
The hob is fitted with a flame failure device. Flame failure devices
operate by shutting off the supply of gas to the burner in the event
that the flame is extinguished accidentally.
To ignite the burners, follow these
instructions:
1. Lightly press the control knob down
and turn the knob anticlockwise to
the maximum position. Firmly press and
hold down the control knob to begin the ignition process (a clicking
sound will be heard). Hold down the control knob for a few
seconds after ignition to allow the safety device to detect that the
burner is lit.
2. Once the burner is lit, adjust the burner power to the required
position.
Please note:
• The ignition device should not be operated for more than
15 seconds.
• If a burner does not ignite, or turns off accidentally, turn the
control knob to the ‘off’ position, and wait for one minute before
attempting to reignite the burner.
• If the burner does not ignite, repeat the ignition process with the
burner at the minimum position.
Fig.3