Matrix BACNET, Руководство пользователя, Страница: 35 / 46

C
ONFIGURATION
BAC
NET
MATRIX BACnet Router User Manual (6/6/2007)
3-9
BACnet IP
Interface Yes/No Specifies if BACnet IP routing is enabled. This value should be
set to Yes in the event that the BACnet Ethernet Interface
option is set to No.
BACnet IP
Network Number 1 - 65534 Specifies the network number for your BACnet IP network.
Each interconnected BACnet network must have a network
number that is unique throughout the internetwork.
BACnet MS/TP
Network Number 1 - 65534 Specifies the network number for your BACnet MS/TP network.
Each interconnected BACnet network must have a network
number that is unique throughout the internetwork.
BACnet UDP
Port Number 47808 - 47823 Specifies the UDP Port of the Matrix Router, which is used to
establish connection less transmissions over IP with other
BACnet IP enabled devices. This UDP port must be the same
as other BACnet IP enabled devices connected on the same
subnet, especially if the controllers exchange messages only
using BACnet IP (BACnet Ethernet Interface = No).
There are notable exceptions to this rule:
a. When another BBMD is on the same subnet, the UDP ports
of the BBMD must be different
b. Any device on the same subnet that registers with the BBMD
as a foreign device (such as Auto-Pilot BACnet or Integra)
must have a different local UDP port from the BBMD.
Only those controllers with the same UDP port on a subnet will
exchange BACnet IP messages. For best results, always
ensure that controllers on an internetwork use the same UDP
ports.
BACnet APDU
Timeout 3000 Specifies the APDU Timeout for Matrix Router. This value
should be configured at the default value of 3000 at all times.
Do not modify this value unless directed to otherwise by AAM
Technical Services.
NOTE
In MS/TP routing applications, it is recommended
that only BACnet/IP or BACnet/Ethernet be
enabled. Both should not be enabled
simultaneously for MS/TP.
Table 3-2: Matrix Router BACnet Router Settings
Variable Values Notes