Matrix BACNET Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 46

Matrix BACNET Скачать руководство пользователя страница 33

C

ONFIGURATION

S

YSTEM

C

ONFIGURATION

MATRIX BACnet Router User Manual (6/6/2007)

3-7

Max Master

1 - 127

Specifies the highest assigned MAC Address (Unit ID) that
exists on the MS/TP network.

This value should be configured similar to all other MS/TP
devices on a network.

Max Info Frames

1 - 32

Specifies the number of data frames used on each
communication interval by Matrix Router when routing MS/TP
packets.

This value should be configured at the default value of 10 at all
times. Do not modify this value unless directed to otherwise by
AAM Technical Services.

This Station (ID)

0 - 127

Specifies the MS/TP MAC Address for this EIA-485 port. This
value must be a unique value on your MS/TP network. By
default, this value is set to zero (0) and is the recommended
address for a BACnet Router.

In the event of a token drop, the lowest addressed unit on the
MS/TP network will have rights to generate a new token and
re-establish network communications.

NOTE

Be sure to follow common instllation practices of
BACnet MS/TP network commissiong with regards
to MAC Address/Unit ID Addressing.

CAUTION

If you are connecting MATRIX Router to an existing
BACnet network of third-party devices, it is
recommended that you investigate the
configuration of the site prior to implementation.

Advanced information about a particular site (IP addressing,
network numbers, device addressing schemes, etc.) can help
reduce the potential for network communication problems.

Table 3-1: MS/TP Network Settings

Variable

Values

Notes

«
...
31
32
33
34
35
...
»

Содержание BACNET















































Отзывы:

Нет отзывов