Matrix BACNET, Руководство пользователя, Страница: 29 / 46

C
ONFIGURATION
C
ONFIGURING YOUR
C
OMPUTER
MATRIX BACnet Router User Manual (6/6/2007)
3-3
3.1 C
ONFIGURING YOUR
C
OMPUTER
Before you can access and configure Matrix Router, you must initially configure your PC’s network card
settings for initial communications. The Ethernet port on the Matrix Router is shipped with a default IP
address, located on the door sticker inside of the enclosure. For you to be able to communicate, you must
set the IP address and subnet mask on your computer so they are compatible with the default settings on
the Matrix Router.
3.1.1 C
ONFIGURING YOUR
N
ETWORK
C
ARD
To set your IP address:
1.
Open Control Panel by selecting Start>Control Panel. If you are working in Classic Mode, click on
Start, then point to Settings, then click on Control Panel.
2. Double-click Network Connections.
3. Double-click your network card listing to invoke connection properties
4. Click on the Properties button.
Figure 3-1 Network Card Properties
5. Select TCP/IP from the Configuration dialog box. Click Properties.
6. At the Properties dialog, enter a valid and unused IP address that is within the range of the Matrix
Router’s default IP address.
7. Enter 255.255.255.0 as your Subnet Mask.
8. Click OK to save the changes and make them effective.
9. Close the Control Panel.
NOTE
If you are unsure of how to configure your IP
address settings, please refer to Windows on-line
help files or contact your Network Administrator for
additional assistance.