Matrix 210.100.100, Оригинальное руководство пользователя

Страница: 50 / 271

Safety
50
KUNDENDIENST
DE
+49 (0) 1806/841090 service@matrix-direct.net
31. Make sure that the device for swinging the arm when cutting with the
mitre saw is secured.
32. Do not remove any cuttings or other parts of the work piece from the
cutting area while the machine is running and the sawing device is
not yet in the resting position.
33. If at all possible, always make sure that the saw is secured on a
workbench or table. The saw is only suitable for private use.
34. Make sure that the saw is in a stable position on firm ground.
Additional safety instructions for laser cutting
•
Do not point the laser beam at persons or animals and do not look
into the laser beam . This laser emits a class 2 laser beam in accordance
with DIN EN 60825-1. You could blind people with it.
•
A laser is not a toy and does not belong in the hands of children
. Using
it incorrectly may result in irreparable damage to the eyes.
•
It is forbidden to manipulate the laser so as to increase its power in
any way . No liability will be assumed for any damages caused as the result
of failure to comply with these safety instructions.
•
The laser does not contain any serviceable parts
. Therefore, do not open
the housing. Otherwise, you will render the warranty void.
•
Warning! Do not swap the laser with another type of laser. Only
the manufacturer of the laser or an authorised representative may
perform repairs
.
Safety instructions for batteries
−
Attention!
Risk of explosion associated with improper handling of the
batteries. Only replace the batteries with the same or an equivalent battery
type. Observe the “Technical data”.
− Never dismantle or short circuit batteries and do not throw them in fire or
in water.
− Avoid battery acid coming into contact with skin, eyes and mucous
membranes. In the event of contact with battery acid, rinse the affected
area thoroughly with clean water and contact a physician as soon as
possible.
− Take the batteries out of the battery compartment if they are empty or if
you do not use the saw for a prolonged period of time. This ensures that
the battery compartment is not damaged by leaked battery fluid.
GB