Matrix Switch Corporation MSC-DE1664, Руководство по эксплуатации продукта

Страница: 22 / 60

MSC-DE1664 Product Manual
E10 Buffer overflow Data exceeds maximum buffer length.
E11 Serial receive overrun One or more characters were lost on the serial interface.
E12 Unsupported command Command is not supported by the system or current configuration.
Firmware 5.3.0 and newer.
E13 I/O Error A general I/O error occurred.
Table 4: Error Codes
3.6 Command Arguments
Command arguments are separated into two categories: numeric and string arguments. These are further
explained in Table 5.
Numeric String
Decimal (123) 1 to 3 decimal digits Unquoted Commands with string arguments
automatically interpret argument as
string (spaces and commas not
allowed).
Hex (0x3D) 0xNN where NN are 2 hex digits
from 0-9, A-F or a-f Double quoted One or more characters surrounded
by double quotes (“An Argument”).
Single quoted One or more characters surrounded
by single quotes ('An Argument').
Table 5: Basic Argument Types
Arguments are shown in the Help command output surrounded by square brackets '[Arg]' or parenthesis '(Arg)'.
Square brackets indicate an optional argument and parenthesis indicate a required argument. Any optional
argument specified requires that all prior optional arguments are also specified. Table 6 lists currently used
command argument types.
Argument Valid Range Meaning
Boolean 0/1, T/F, True/False Boolean true or false value.
Cmd String MASCOT command.
Cond String Condition statement. See PanelCond C ommand .
Dest 1-N Destination number (N = Count of destinations)
IP D.D.D.D IP address string argument, specified as 4 decimal numbers from 0 to 255
separated by periods.
Json String JSON formatted string, the structure of which depends on the command.
The JSON string should be quoted in single quote characters when
specifying a JSON value in a command.
Label String A string label argument, max of 8 characters.
Lvl 1-N Level number (N = Count of system levels)
Netmask D.D.D.D Network mask string argument, specified as 4 decimal numbers from 0 to
255 separated by periods. Must be a valid IPv4 netmask.
Number Numeric value. Valid values depends on command.
Preset 0-9 Preset number (preset 0 is special Startup preset)
Page 22 of 60 © 2013-2019 Matrix Switch Corporation www.matrixswitch corp.com