Matrix Switch Corporation MSC-DE1664 Скачать руководство пользователя | Manualshive

Страница: 39 / 60

background image

MSC-DE1664 Product Manual

>

PanelCmd 66,””

>

The first example above queries the currently assigned panel/GPIO commands, which shows that button
number 1 and 2 have P0 and P1 commands assigned respectively, which recalls preset 0 and preset 1, and GPIO
pin 1 (GPIO pins start at 65) will recall preset 0. The second command queries the panel command for button
1. The third command assigns the command “P1” to GPIO pin 2 (ID 66). The fourth command clears the
command assigned to GPIO pin 2.

3.11.25 PanelCmdEn Command

Protocol Version: 3.0
NOTE:

Superseded by the

pnl.cmdEn

System Parameter

Query and assign panel button/GPIO command macro and condition subsystem enable. This command is used
to enable or disable button and GPIO commands and conditions. See

commands for

more details.

Command

Description

PanelCmdEn

Query panel button/GPIO command and conditions enable.

PanelCmd 0 | 1

Enable or disable panel button/GPIO command and conditions (0: disable, 1: enable).

Examples for querying and enabling panel command/conditions

>PanelCmdEn

0
>

PanelCmdEn 1

>

3.11.26 PanelCond Command

Protocol Version: 3.0

Query and assign panel button/GPIO status and indicator conditions. Panel button/GPIO conditions are a
counterpart to

and provide a means to easily implement custom status to light panel buttons or

change logic states on output GPIO pins. Panel buttons and GPIO pins are specified by numeric ID.

Panel buttons are numbered beginning with ID number 1. Panel button order depends on the panel, but
generally has the top left button as button 1, followed by number 2 in the lower left corner, number 3 in the top
second column, continuing to alternate between top and bottom rows till the last button (lower right hand
corner).

NOTE:

Condition statements are not currently fully defined and at the moment consists of only a matrix preset

matching condition, which is specified as “Pn” where n is the preset number. For example P0 would cause the
assigned button LED to light or GPIO to become a logic high value if the current matrix state matches preset 0.
A future revision will add support for a more robust conditional instruction language.

GPIO auxiliary pins start with ID number 65 for GPIO pin 1.

Page 39 of 60

© 2013-2019 Matrix Switch Corporation

www.matrixswitch

«
...
37
38
39
40
41
...
»

Содержание MSC-DE1664





























































Отзывы:

Нет отзывов

Похожие инструкции для MSC-DE1664

Бренд: Under Control Страницы: 9

MicroHub GUH274W3

Бренд: IOGear Страницы: 1

Бренд: XtendLan Страницы: 24

NEXT-POE4210L2S-TP

Бренд: Synology Страницы: 15

Бренд: ALFAtron Страницы: 15

Бренд: AETEK Страницы: 2

Бренд: SignaMax Страницы: 6

Бренд: Ruby Tech Страницы: 301

Universal Videohub 288

Бренд: Blackmagicdesign Страницы: 107

Бренд: Grizzly Страницы: 2

Бренд: Eneo Страницы: 19

Бренд: Atlona Страницы: 13

Бренд: Santon Страницы: 16

Бренд: Black Box Страницы: 13

Бренд: Edge-Core Страницы: 2

Бренд: Unifore Страницы: 8

Бренд: Omega Страницы: 4

Бренд: Keysight Technologies Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды