Matrix Switch Corporation MSC-DE1664 Скачать руководство пользователя | Manualshive

Страница: 60 / 60

background image

MSC-DE1664 Product Manual

7 Matrix Switch Corporation Warranty

MSC provides the following limited warranty with its products:

1. MSC warrants that the equipment it manufactures is free from defects in material and workmanship.

2. This warranty begins on the day the product is shipped from MSC and shall be in effect for two years.

3. If the product is found to be defective, MSC shall at its option:

a) Provide free replacement parts.
b) Repair the unit at MSC's facilities.
c) Repair the unit at the customer's location.
d) Exchange the product for a product of the same type.

MSC shall make every reasonable effort to support critical emergencies by supplying no-cost loan equipment while the
defective unit is being repaired.

4. Customer bears the cost of shipping products returned to MSC under this warranty; however, MSC shall bear the cost
of shipping repaired products or replacement parts to the customer.

5. Any customer returning a product for repair shall first obtain from MSC a Return Material Authorization (RMA)
number which shall be placed on the outside of the shipping package.

6. This warranty does not apply if the product has been damaged by accident, abuse, misuse, misapplication or
modification.

EXCEPT AS SET FORTH ABOVE, NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.  MSC EXPRESSLY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES NOT STATED HEREIN.
IN THE EVENT THE PRODUCT IS NOT FREE FROM DEFECTS AS WARRANTED ABOVE, THE PURCHASER'S
SOLE   REMEDY   SHALL   BE   REPLACEMENT   OR   REPAIR   AS   PROVIDED   ABOVE.   UNDER   NO
CIRCUMSTANCES   WILL   MSC   BE   LIABLE   TO   THE   PURCHASER   OR  ANY   USER   FOR  ANY   DAMAGES
INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSE, LOST PROFITS, LOST SAVINGS OR
OTHER DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE THE PRODUCT, EVEN IF MSC
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

To the extent this warranty conflicts with local law, local law shall only apply to such conflict.

Matrix Switch Corporation
Website:

www.matrixswitch

Email:

info@matrixswitch

Toll free: (800) 764-4084
Phone: (530) 477-9122 (Grass Valley, California)

Page 60 of 60

© 2013-2019 Matrix Switch Corporation

www.matrixswitch

«
...
58
59
60

Содержание MSC-DE1664





























































Отзывы:

Нет отзывов

Похожие инструкции для MSC-DE1664

ePowerSwitch 8M+R2

Бренд: Neol Страницы: 74

Бренд: Delta Страницы: 4

Бренд: vantiva Страницы: 58

GenReady Series 005448-2

Бренд: Generac Power Systems Страницы: 4

Web-Smart GS-1208M

Бренд: Ruby Tech Страницы: 2

Бренд: ASTEK Страницы: 3

Бренд: B&B Electronics Страницы: 22

Бренд: Cabletron Systems Страницы: 194

SI1P-SH-DVI-UCAC

Бренд: Black Box Страницы: 16

Бренд: Konig Страницы: 40

Бренд: AV-Box Страницы: 11

Бренд: A-Neuvideo Страницы: 12

Бренд: Power Ethernet Страницы: 2

Бренд: ATEN Страницы: 2

Бренд: hager Страницы: 4

Бренд: Madas Страницы: 24

Бренд: Efapel Страницы: 44

IP-Watcher 2x2 Digital PoE

Бренд: W&T Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды