Matrix Switch Corporation MSC-DE1664 Скачать руководство пользователя

Страница: 56 / 60

MSC-DE1664 Product Manual

some example commands for various distributions.

Commands for installing tftp on different Linux distributions:

•

Ubuntu: sudo apt install tftp-hpa

•

Fedora: yum install tftp

•

Suse: smart install tftp

Using the tftp application on Linux:

1. Copy the firmware file to somewhere easily accessible from the Terminal application, for example the

Desktop.

2. Open a Terminal command line application (

CTRL-ALT-T

will do this on many desktop environments).

3. Use 'cd' commands to change to the directory where the firmware file is located, for example (if the

firmware file is on your desktop) ‘

cd ~/Desktop

’ followed by the ENTER key.

4. Execute the tftp command with the IP address of the device (make sure to use the device's configured IP

if the update method being used utilizes the devices IP address):

tftp 192.168.2.59

5. Execute the following commands from within the tftp program, pressing ENTER after each line, except

the last one, to prepare the TFTP transfer:

binary
put MSC-Carina-Firmware-x.x.x.hex

6. Make sure to replace MSC-Carina-Firmware-x.x.x.hex with the correct version number of the file.
7. Pressing ENTER after the put command will initiate the TFTP transfer. Make sure to perform the

necessary actions to prepare the system for an update, prior to attempting the transfer.

8. The TFTP program will indicate if the transfer was successful or not.
9. If the transfer failed (timed out, etc), retry the

put

command or quit the application (type 'quit' and

ENTER) and start over from step 4.

Page 56 of 60

www.matrixswitch

corp.com

Содержание MSC-DE1664





























































Результаты поиска

Содержание MSC-DE1664

Отзывы:

Похожие инструкции для MSC-DE1664

Бренды по названию

Популярные бренды

Matrix Switch Corporation MSC-DE1664, Руководство по эксплуатации продукта

Результаты поиска

Содержание MSC-DE1664

Отзывы:

Похожие инструкции для MSC-DE1664

Бренды по названию

Популярные бренды