HOW TO ADJUST THE Matrix S-Series Indoor Cycle
The Matrix S-Series Matrix S-Series Indoor Cycle can be adjusted for maximum comfort
and exercise effectiveness. The instructions below describe one approach to adjusting the
Matrix S-Series Indoor Cycle to ensure optimal user comfort and ideal body positioning;
you may choose to adjust the Matrix S-Series Indoor Cycle differently.
Pedal strap adjustment:
Sit on the saddle and position your feet on the pedals, with the balls of your feet directly
above the spindles of the pedals (see the drawing below). Adjust the pedal straps so the
toe clips (cages) are snug but not too tight. Note: In the case of a bike being fi tted with
combi-pedals, the pedals feature toe clips on one surface and SPD cleats on the opposite
surface. If desired, use the SPD cleats with cycling shoes instead of the toe clips.
Saddle height adjustment:
Sit on the saddle and slowly pedal until the right pedal is in the lowest position. Your knees
should be slightly bent without a dropping of the hips.
To avoid hyper extending your knees, make sure that your legs are not completely
straight.
Please do not adjust
handlebar height beyond
the STOP mark on the stem
and ensure the pop pin is
fully engaged and securely
tightened (see page 6).
Version 1.0 2013 IC-MXSB-01 Copyright by Indoorcycling Group GmbH 2013
|
www.indoorcycling.com
ENG 9
Please do not adjust saddle
height beyond the STOP
mark
on
the
stem
and ensure the pop pin is
fully engaged and securely
tightened (see page 6).
Please avoid overtightening the pop pin adjustment knob as this may cause damages
to the vertical aluminum stems.
ENG
ESP
