Matheo MPJ 351, Быстрый старт

Страница: 17 / 18

Problem Solution
The juicer does not work.
The juicer is equipped with a safety system. If
the accessories are not properly connected with
the motor unit, the juicer does not work. Check
whether the accessories have been connected in
the right way (see the various sections). Turn off
the juicer first!
This appliance is equipped with overheat protec-
tion. If the appliance overheats, it switches off au-
tomatically. Unplug the appliance and let it cool
down for 10 minutes. Then put the mains plug
back into the wall socket and switch on the ap-
pliance again.
The knife unit/ motor unit is
blocked.
Turn off the juicer and process a smaller quantity.
The motor unit gives an un-
pleasant smell during the
first few times of use. This is normal for the first few applications. If the
smelling continues, check the quantity you are pro-
cessing, the application time, or used speed.
The sieve of the juicer makes
contact with the feeding
tube or shows a high vibra-
tion during processing.
Turn off the juicer. Check if the sieve is properly con-
nected. The ribs on the bottom of the sieve should
fit properly on the motor coupling opening.
Check if the sieve is not damaged. Cracks, fissures,
loose grater disc or any other irregularity may
cause malfunction.
Check whether the rubber ring is assembled in a
correct way.
Troubleshooting
If you encounter problems when using this juicer, check the following
points before requesting service. If you cannot solve the problem, contact
the Consumer Care Center in your country.
8