Installation
Page 11
Figure 7: Saw off the pipe section
Figure 8: Deburr the edges
7.
Repeat the instructions on the second half of the drive shaft.
8.
Deburr all edges that have been cut.
9.
Grease the pipe sections.
Figure 9: Greasing the section pipes
10. Push the section pipes together.
5.3.2
Installing the drive shaft
1.
Push down the locking disc on the outer side and keep it pushed down.
2.
Pull the splined hub on the splined shaft of the power take-off.
3.
Release the locking disc.
4.
Move the drive shaft somewhat to and fro until the locking disc latches audibly.
Figure 10: Latch in locking disc
5.
Connect the counterpart of the shaft with the extension unit and secure it with the
screw contained in the delivery scope.
6.
Mount the safety chains of the drive shaft to a fixed element on the tractor and on
the extension unit.
