Installation
Page 7
3
Mounting the snow plow
Danger!
Severe injury to the operator or third parties occurs.
Switch off the tractor and remove the ignition key before mounting or dis-
mounting the implements.
Attention!
This snow plow is a device with a standard interface that can be attached on
virtually any tractor with a cat. 0 coupling triangle.
Comply with the attachment recommendations in the current price list.
&
Note!
Enter the chassis number of the front power lift in section , 5.4, on page13 of
this operating manual.
3.1
Adjusting the height of the coupling triangle on the snow plow
To better adapt the snow plow to the different tractors, the height of the coupling triangle
on the snow plow can be adjusted Different bores are provided on the coupling triangle of
the snow plow for this purpose.
&
Note!
The coupling triangle is only adjusted the first time the snow plow is
mounted.
Fig. 1: Height adjustment of the coupling triangle
1.
Unscrew all M16 fastening screws on the coupling triangle.
2.
Dismount the coupling triangle from the snow plow.
3.
Mount the coupling triangle at the required height on the snow plow.
4.
Tighten all four screws.
Coupling triangle
Fastening screws