matev SRM-VP 130 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

matev SRM-VP 130 Скачать руководство пользователя страница 5

Safety

Page 5

2.3

General safety instructions

General safety instructions are explained in this section. These safety instructions are
used in the subsequent sections. In addition to the safety aspect, you will save money
and work time if you follow these safety instructions.

Danger!
Severe injury to the operator or third parties occurs.
Follow the safety instruction.

Attention!
Minor injury to the operator or third parties can occur. The tractor or the
environment can be damaged.
Comply with the safety instruction.

&

Note!
Important, helpful tips or information for the operator.
Read this note. It facilitates your work.

Attention!
Injuries can occur.
Wear protective work clothing.

2.4

Special safety instructions

Safety instructions are specified in this chapter that are also affixed as stickers on the im-
plements

Attention!
Danger of injury due to moving parts.
Remove the ignition key before performing maintenance tasks on the im-
plement.

Attention!
Injuries can occur due to improper operation. The implement can be dam-
aged.
Read the operating manual all the way through.
Comply with the safety instructions.

«
...
3
4
5
6
7
...
»

Содержание SRM-VP 130

















Отзывы:

Нет отзывов