background image

Page 1

When unpacking, check the parts diagram and part number 
listing on page  3  to make sure all parts are included. If any 
parts are missing or damaged, please call your distributor. 

Unpacking

MADE IN TAIWAN

PRODUCT INFORMATION:

Study, understand and follow all instructions provided with this product.

Read these instructions carefully before installing, operating, servicing 

or repairing this tool. Keep these instructions in a safe accessible place.

• Use of this product can expose you to chemicals such as 

phthalates which are known to the State of California to cause 
cancer, and birth defects or other reproductive harm. For 
more information go to www.P65Warnings.ca.gov/product.

  Always wear ANSI approved safety equipment, safety glasses 

and clothing when using this product. Study, understand, and 
follow all instructions provided with this product. Failure to 
read and follow all warnings and operating instructions may 
result in damages and serious injury or death.

• Always wear ANSI approved goggles when using this 

product. (Users and bystanders).

• Never use this tool for any application other than for 
  which it was designed. 
• Only use accessories designed for this tool. 
• Never alter or modify this tool in any way. 
• Improper operation and/or maintenance of the tool, 

modification of the tool, or use of the tool with accessories 
not designed for it could result in serious injury or death. 

• Always select the correct accessories of the correct size and 

design for the job that you are attempting to perform.  

• Always work in a clean, safe, well-lit, organized and 

adequately equipped area. 

• Do not begin repairs without assurance that vehicle is in 

secure position, and will not move during repair. 

WARNING

INTENDED USE OF THE TOOL

WARNING

DO NOT DISCARD – GIVE TO USER

              1 YEAR LIMITED WARRANTY

The manufacturer warrants this product to the original user against defective 
material or workmanship for a period of 1 year from the date of purchase.

The manufacturer reserves the right to determine whether the part or parts 
failed because of defective material, workmanship or other causes. Failures 
caused by accident, alteration, or misuse are not covered by this warranty.

The manufacturer, at its discretion, will repair or replace product covered 
under this warranty free of charge. Repairs or replacements of products 
covered under this warranty are warranted for the remainder of the original 
warranty period.

The manufacturer or its authorized service representatives must perform all 
warranty repairs. Any repair to the product by unauthorized service 
representatives voids this warranty. The rights under this warranty are limited 
to the original user and may not be transferred to subsequent owners.

The warranty is in lieu of all other warranties, expressed or implied, including 
warranties of merchantability and fitness for a particular purpose. Some 
states do not allow the exclusion or limitations of incidental or consequential 
damages, so the above limitations may not apply to you. 

These Torque Limiting Extension Bars are designed to quickly 
attach wheels while limiting torque. 

NOT TO PERFORM THE 

FINAL INSTALLATION OF WHEELS. A TORQUE WRENCH IS 
REQUIRED TO TORQUE WHEELS TO THEIR SPECIFICATION.

TLS788

MODEL:

10 PIECE TORQUE LIMITING 

EXTENSION BAR SET

10 PIECE 

TORQUE LIMITING 

EXTENSION BAR SET

• Quickly mount wheels to the vehicle while limiting torque
• Increase efficiency and eliminate damage caused by
  impact wrenches.
• No maintenance or calibration necessary.
• Color coded.
• Material: CR-MO with matt finish.
• Set Includes the following 1/2" Drive /8" Torque Limiting
  Extension Bars:
  65ft/lbs (90Nm)
  75ft/lbs (100Nm)
  80ft/lbs (110Nm)
  90ft/lbs (120Nm)
  100ft/lbs (135Nm)

110ft/lbs (150Nm)
120ft/lbs (160Nm)
130ft/lbs (175Nm)
140ft/lbs (190Nm)
150ft/lbs (200Nm)

USE A TORQUE WRENCH TO TORQUE LUG NUTS TO FINAL SPECIFICATION, 

DO NOT USE THIS TOOL BY ITSELF !

Содержание TLS788

Страница 1: ... product to the original user against defective material or workmanship for a period of 1 year from the date of purchase The manufacturer reserves the right to determine whether the part or parts failed because of defective material workmanship or other causes Failures caused by accident alteration or misuse are not covered by this warranty The manufacturer at its discretion will repair or replace...

Страница 2: ...ue el vehículo esté en posición segura y que no se mueva durante la reparación TLS788 El fabricante garantiza este producto al usuario original contra defectos de materiales o de mano de obra durante un periodo de un año a partir de la fecha de compra El fabricante se reserva el derecho a determinar si una pieza o piezas fallaron debido a material defectuoso mano de obra o por otras causas Esta ga...

Страница 3: ...allow More mass will increase the calibration torque level of the whole tool B Use a different impact gun if available Power level has some effect but IPM impact per minute is the primary determinant of how close the extension will perform to its stated value from the factory An impact gun with a higher IPM will not allow a torque limiting extension to rotate back and fight against the impact gun ...

Страница 4: ...8 07 TLS788 08 TLS788 09 TLS788 10 65Ft lbs 90Nm Green 75Ft lbs 100Nm Black 80Ft lbs 110Nm Yellow 90Ft lbs 120Nm Red 100Ft lbs 135Nm Blue 110Ft lbs 150Nm Orange 120Ft lbs 160Nm Gray 130Ft lbs 175Nm Purple 140Ft lbs 190Nm White 150Ft lbs 200Nm Light Green TLS788 MODEL 10 PIECE TORQUE LIMITING EXTENSION BAR SET Page 3 1 2 3 4 5 6 7 8 9 10 ...

Отзывы: