Matco Tools MWLFL2800, Инструкция по эксплуатации

Страница: 2 / 4

2
SAFETY INFORMATION
• Check for damaged parts and any other
conditions that may affect the operation
of this product. Replace damaged parts
immediately.
• Do not use the lamp in the immediate vicinity
of inflammable materials or gases.
• Only use the accessories included with the
product .
• Keep the lamp out of reach of unauthorised
persons, especially children.
• Do not point the light directly in your own or
any other person’s or animal’s eyes.
PACKAGE CONTENT
NOMENCLATURE
OPERATING INSTRUCTIONS (REFER
“NOMENCLATURE”)
Charging
1. Fully charge the battery before the first use
on battery source.
2. Turn off the light and connect to the supplied
charger cable.
3. When the battery is fully charged, all the
indicator LEDs will constantly turn GREEN .
4. Full charging takes about 3 hours.
OPERATION
Mount the magnetic base on the bracket as
shown below to mount the light on a metal
surface.
USE WITH BATTERY POWER
• To switch ON the light press the button
labeled ON/OFF at the back of the unit.
• To change the intensity of light press the
button labeled 50%/100%.
• Power Bank- Insert a USB cable in the USB
slot and the device connected with the
battery will start charging
DESCRIPTION QUANTITY
Light 1
Magnetic base 1
Battery pack 1
Charging cable 1
A Light
B Adjusting Knob
C Bracket
D Magnetic
E Handle
F Buttons
G Battery Pack
H Socket
I Adaptor
A
E
F
G
B
C
D
H
Side View
I
Back View
Charging
input port
ON/OFF
USB output port
Intensity control
Battery Level Indicator