3
USE WITH AC POWER
1. Remove the battery from the light by
opening both the locks on the top and
bottom of the battery.
2. Assemble the adaptor and insert the cable
inside socket of the light.
3. Switch ON the power to switch on the light.
Note:
There is no intensity setting for use in AC
power source
MAINTENANCE
• Before cleaning the LED worklight,
disconnect the USB cable(if being charged)
and allow the worklight to cool down
sufficiently.
• Clean with a dry or slightly moist, clean, lint-
free cloth and a mild detergent if required.
• Do not use cleaners that contain abrasives
or solvents.
• Check the LED worklight for damage before
each use. If the lens is damaged it must be
replaced immediately.
• Clean any dirt from the housing or the
lens immediately, since it could cause
overheating.
Note:
The light source of this luminaire is not
replacable; when the light source reaches its
end of life the whole luminaire shall be replaced
DISPOSAL
The components or the used products must
be given to companies that specialize in the
disposal and recycling of industrial waste.
Содержание MWLFL2800
Страница 4: ......
