Page of 18
1703114-12MA
7
TECHNICAL SPECIFICATIONS
Item
Specification
Power Supply
230V, 42A, 50/60 Hz, Single Phase
No-Load Voltage
310V DC
Output Range
20 - 60A DC
Duty Cycle
30% @ 60A
Compressed Air Required
4.5 CFM @ 60psi - DO NOT SUPPLY MORE THAN 100psi
Dimensions
18-5/8
ʺ x 7-3/8ʺ x 13-1/2ʺ
Weight
37-1/4 lb.
DESCRIPTION
The MATCO TOOLS MPPC60I is a heavy-duty, 60 amp, DC inverter plasma cutter. Its intended use is for
cutting through steel, stainless steel, aluminum, and other metals. This unit is designed to cut up to 9/16"
steel (sever cut) at a travel speed of 10 inches per minute, when operating on 230V AC power.
See chart
below. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. The
MATCO TOOLS MPPC60I is lightweight (37-1/4 lbs.), compact, inverter design for greater portability.
It has a pilot arc for easy starts and enables the user to cut fence or expanded metal. This unit has
a built in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal
overload protection. The electrode, nozzle, swirl ring and protective cap are consumable items
and available through your MATCO TOOLS dealer. This unit is supplied with a NEMA Class 6-50P
plug and will require a NEMA Class 6-50R receptacle.
Ground Cable
And Clamp
Air Pressure
Display
Air Pressure
Adjustor
Indicator
Lights
Plasma
Torch
Amperage
Adjustment
