Matador Radiant Pro, Инструкция по эксплуатации

Страница: 34 / 48

Setting The Controller
Step 1 - Setting your temperature units
Step 2- Setting the pit temperature
1.1 Before setting up your Air Controller with your desired settings you need to select your unit of
temperature measure - Degrees Celsius or Fahrenheit.
1.2 By pressing and holding the ‘Enter’ button down you can toggle between C or F.
1.3 Select your preference.
NOTE: You can toggle between the units at any time during your cook if desired.
2.1 Press the ‘Select’ button once to activate the Pit Temperature setting. It is selected when the digits start
to flash.
2.2 Use the ‘Arrow’ buttons to move the desired temperature up or down. Holding down the ‘Arrow’ buttons
will move the temperature by 10 units at a time. A single press of the button will allow for single unit
increments to be selected.
2.3 When you have selected your desired pit temperature, press the ‘Enter’ button to lock in your setting or
press ‘Select’ to move and set your Meat Probe temperatures.
Press and hold ‘Enter’
Button
Toggle between C and F
After setting the temperature
that is required, press ‘Enter’
to set the and exit or press
‘Select’ to move to the meat
probe values.
4.
Press ‘Select’ Button
once to highlight ‘Pit
Target’ temperature.
Temperature
value will flash to
show ready for
setting target
1.
2.
Use ‘Up’ and ‘Down’ arrow
buttons to select desired pit
temperature
3.