manualshive.com logo in svg

Matador Radiant Pro, Инструкция по эксплуатации

Поделиться
Скачать
Matador Radiant Pro Скачать руководство пользователя страница 33

 33

MATADOR INSTRUCTION MANUAL

Controller Power

Power source

Power Cord Input

5V USB Wall 
Adaptor
(Not supplied)

Power Cord

The Radiant Pro Air Controller is powered by a rechargeable 3.7V lithium Ion battery which allows your 
controller to operate independently of a power cord. For longer cooks you can connect the unit directly to a 
low voltage adaptor for constant power.

IMPORTANT: DO NOT STORE YOUR AIR CONTROLLER ON YOUR BBQ. REMOVE AFTER EACH COOK 
AND STORE INDOORS TO PROTECT IT FROM MOISTURE AND DEBRIS INGRESS.

MIN 

1AMP

Charging the Air Controller

•  To charge the Air Controller you will need a 5V USB Wall Adaptor (not supplied) that has a minimum 

output of 1 AMP.

•  Insert the power cord into both the bottom of the Air Controller and the wall adaptor.
•  Whilst the Air Controller is charging, the power status icon on the unit will flash until it is fully charged.

Air Controller Performance

•  Under standard cooking conditions you can expect to get between 4-5 hrs of run time from your Air 

Controller when being run solely on battery power. (NOTE: Differing cooking conditions will see this time 
vary)

•  Connect a power adaptor if you believe the battery power will expire during the cook.
•  As the Air Controller is charged via a USB cable you can connect your power cord to a USB Power Bank 

if desired to charge and power your unit.

•  The Air Controller will power down when not active to help save battery life. Press any key (except 

power) to light up LCD screen. It will stay illuminated for a period of time before shutting off to save 
battery power.

Power Status Icon

Содержание Radiant Pro

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды