7
Use
Installation and removal of the battery
Release the cover of the battery container by pulling the bolting clips upwards at the same
time (fig. B). Lift the cover (fig. C) and install the two batteries such that the contact points
match the receiving slots in the battery container (fig. D, fig. E, fig. F ).
fig. B
fig. C
fig. D
Finally close the battery container by replacing the cover and locking the cover with the two
bolting clips at both sides fig. G).
fig. E
fig. F
fig. G
To remove the batteries follow the procedure as described above in the reverse sequence.
Ensure that the cover of the battery container is always reinstalled with or without batteries
inserted.
