4
Take care of a stable loading
Ensure that the load on the wheelbarrow is not stacked too high.
Do not exceed the maximum allowable load.
Do not operate on slopes in excess of 20 degrees.
Operate the equipment with the use of both hands.
Use the right equipment
The designated use of the equipment is described in this instruction booklet.
The equipment performs best and safest when used for its designated use.
Warning
To avoid bodily injury only use the components as described in this instruction booklet.
Use the equipment only as designated.
Check the equipment for damage
Check the equipment on damage prior to use.
Check if all moving parts are fitted correctly, if parts are broken, if protection covers and
switches are damaged and if other shortcomings are evident that may have an effect on
the correct operation of the equipment.
Do not use the equipment when any component or part is faulty.
Do not use the equipment when the on-off switch fails.
Faulty components or parts shall be repaired or replaced by skilled personnel only.
Remove the battery
Remove the battery from the equipment in the following situations.
When the equipment is not in use.
When components or parts of the equipment need to be replaced.
When the equipment is to be serviced.
Avoid unintentional switch-on
Ensure that the equipment is switched off prior to the installation of the batteries.
Do not misuse the flex
Do not hang the battery charger on the flex.
Do not use the flex to pull the plug out the socket.
Keep the flex away from heat sources, oil and sharp edges.
Store the equipment at a safe location
Store the equipment, battery charger and batteries in a dry space after usage and out of
children’s reach. Remove the batteries from the battery compartment.
Maintain the equipment with care
Keep the equipment in a clean condition for better and safer work.
Adhere to the instructions with regard to the maintenance and the replacement of
components.
Keep the handles and switches dry and free from oil and grease.
