background image

12

Instructions for use of attachments: Desktop Chargers 4-814/4-816

Version: 28.04.2008

1. Main switch/pilot lamp  <=> 

Switch is alight when the charger is ON

2. Charge indicator lamp  <=>   

Glows steady red when a depleted RECHARGEABLE BATTERY 4-809/4-810 is being charged 

2. Charge indicator lamp  <=> 

Glows green when RECHARGEABLE BATTERY 4-809/4-810 is fully charged

3. Charging compartment  <=> 

For inserting the RECHARGEABLE BATTERY 4-809/4-810 in the direction indicated by the arrow

4. Battery 

<=> 

Rechargeable battery 4-809/4-810

Preparing for use: 

Step 1.  Plug in power plug at the socket; switch on at main switch

 (1)

; triple-function lamp

 (2)

 glows red ( see description in Step 

3)

.

Step 2.  Insert RECHARGEABLE BATTERY 4-809 or 4-810 (4) into the charging compartment 

(3)

 in the direction of the arrow.

Step 3.  The charge indicator lamp 

(2) 

must first flash red for 20 seconds if the BATTERY 4-809/4-810 is depleted. After approx. 

20 seconds, it glows steady red to indicate that the battery is being charged. When the battery is fully charged, the lamp changes 

to green. 

(4) 

The charging time for a depleted BATTERY 4-809/4-810 

(4)

 is approx. 60 minutes. The lamp glows green to indicate 

when charging is complete. During charging, the Charger 4-814/4-816 and the BATTERY 4-809/4-810 warm up, but this does not 

indicate a fault. As soon as the BATTERY 4-809/4-810 is fully charged, the lamp glows green 

(2)

 Chargers 4-814 and 4-816 switch 

off automatically when the BATTERY 4-809/4-810 is fully charged. This means that you can leave the BATTERY 4-809/4-810 in the 

operational Charger 4-814/4-816 for a prolonged period so that it is always charged to full capacity without any risk of overcharging  

The BATTERY 4-810 should be checked and recharged before use!

Fault:

 

After inserting BATTERY 4-809/4-810 

(4)

 in the charging compartment 

(3)

, the charge indicator lamp 

(2)

 on the Charger 4-814/4-816 

fails to light up.

FAULT RECTIFICATION:

 

Turn the 

BATTERY 4-809/4-810 

(4)

 slyghtly in the charging compartment 

(3)

, the charge indicator lamp 

(2)

 on the Charger 4-814/4-816 

fails to light up.

NOTE AND WARNING:

if there is a power fialure, neither of the pilot lamps (1) amd (2) will glow.

Chargers 4-814/4-816 and BATTERIES 4-809/4-810 are not medical devices, and therefore should only be used in closed 

rooms outside the operating theatre. Only use in rooms that are free of dust and moisture.

IMPORTANT: SAFETY INSTRUCTION!  

Only store in the original packaging, in a dry, closed room. Never sterilise the BATTERY 4-809/4-810 or the Charger 

4-814/4-816. Only use compatible BATTERIES 4-809 and 4-810 from MAT GmbH&Co.KG. Combination with other makes is 

forbidden. Do not immerse Charger 4-814/4-816 or BATTERY 4-809/4-810 in liquid.

1

2

3

4

Содержание 4-807

















Отзывы: