MAT 4-807 Скачать руководство пользователя страница 13

Страница: 13 / 16

Care and maintenance:

Unplug from the power supply before cleaning. Use a damp cloth for cleaning the Charger 4-814/4-816 and BATTERY 4-809/4-810.

Do not use cleaning agents. Make sure that the contacts of BATTERY 4-809/4-810 are kept free of moisture. Similarly, protect the

charging compartment (3) of the Charger 4-814/4-816 against moisture.Never immerse in liquid or clean under flowing water!

Repair:

MAT GmbH & Co. KG only accepts responsibility for the safety, reliability and performance of the Charger 4-814/4-816 and BATTERY

4-809/4-810if:

• the Charger 4-814/4-816 and BATTERY 4-809/4-810 are used in compliance with the instructions in the User’s Manual.

• installation, additions, adjustments, modifications and repairs are carried out by MAT GmbH&Co.KG or by qualified persons ex

pressly authorised by MAT GmbH&Co.KG.

Only original spare parts from MAT GmbH&Co.KG may be used for repairs.

The operator is required to obtain a list detailing the type and scope of work performed, with the company stamp, date and signature

of the repairer.

WARNING!

All equipment must be cleaned before sending for servicing!

Transport and storage conditions:

To prevent damage!

The Charger 4-814/4-816 and BATTERY 4-809/4-810 must be transported in the aluminium case provided, which has a special foam

insert. The same applies for correct storage of this device. This device must only be kept in a dry, closed place!

Safety instruction:

1. If any fault occurs

2. For transport or storage when not in use

3. Before sending for servicing

If, for any reason, the device is stored or transported differently, this may result in damage which is not covered by the manufacturer‘s

or dealer‘s warranty.

Transport and storage conditions:

Electromagnetic compatibility (EMC):

Manufacturer’s certificate issued by MAT GmbH&Co.KG:

It is hereby certified that the Chargers 4-814 and 4-816 have been tested and are interference-suppressed in compliance with

the EMC provisions of EN60601-1-2:1993. These Chargers 4-814 and 4-816 have been tested in compliance with EN60335-2-29/

A11:1998 and conform to Germany’s equipment safety regulations (GSG) for placing into commerce.

Содержание 4-807

















Результаты поиска

Содержание 4-807

Отзывы:

Похожие инструкции для 4-807

Бренды по названию

Популярные бренды

MAT 4-807, Руководство пользователя

Результаты поиска

Содержание 4-807

Отзывы:

Похожие инструкции для 4-807

Бренды по названию

Популярные бренды