Rev 00.00
Page 20 of 32
reproduction of this manual, even partial, is forbidden.
INITIAL START-UP
Par
Description
3
Use of the suction arm
The machine is fitted with one suction arm which must be assembled separately using the screws supplied in
the package. The arm's flange must be fixed to the plate, with pre-drilled holes, on the air cleaner.
The suction arm can rotate 360° about the central a xis during the rotation phase.
Arm closing and/or opening operations must be carried out only from the front of the machine with the
operator facing the control panel.
The use of the suction arm outside the recommended range may cause the machine to tip over. In fact,
when movements are carried out along the longest side of the machine the force exercised is such as to
move the barycentre and act as a lever lifting and/or tipping over the air cleaner in the direction of the
operator moving the arm.
Max 30
°
Max 30
°
MW 1900 WELDING FUME EXTRACTOR
Masterweld | 2018 all rights reserved
