Rev 00.00
Page 19 of 32
reproduction of this manual, even partial, is forbidden.
INITIAL START-UP
Par
Description
2
Control panel and electrical panel on the machine
The machine is equipped with an electrical panel which acts as control panel and as container for the
protection devices of the electric motor.
The control panel is on the front of the machine near the handle. The control panel is covered by a painted
plate with the adhesive strip as shown below.
The position of the panel makes it easy to switch the machine on and off and to keep all the machine
functions under control by means of the indicator lights on the panel.
The handle protects the panel against accidental knocks which could damage the equipment thus making it
impossible to control the machine.
The label above the panel helps the operator use the equipment and check its correct operation.
Indicator for fan on/off
Filters clogging
indicator
On/off switch
MW 1900 WELDING FUME EXTRACTOR
Masterweld | 2018 all rights reserved
