MONITORING
AND
CONFIGURATION
EN / MasterView Easy MkII / September 2010
13
6.2
MASTERVIEW EASY CONFIGURATION
To change settings of the MasterView Easy display,
press Go To Configuration. The MasterView Easy
configuration menu is used for read out and
adjustment of settings like backlight illumination,
displayed language and number of devices.
The MasterView Easy Configuration Lock
disables configuration of all connected
devices. After selection of
Configuration
Enabled
the Configuration Lock symbol disappears
in all configuration groups. The first configuration
group (at Easy panel: General) always remains
enabled.
Variable Meaning
Default
Adjustable.
range
General
Name yacht
Name of the boat, the panel is installed on.
See also section 6.2.1.
Yacht name
Maximum 16 characters
Device name
Name of this device. This name will be
recognized by all connected devices.
DIS MV
Easy
DIS+Maximum 12 characters
Switch X
Switches to use for event configuration.
Renaming the switches after their application
is recommended. X ranges 1 – 6.
Switch X
Maximum 16 characters
Devices in list
Devices to show in the device list. At
Selection
three selection boxes appear to
choose a MasterBus device connected.
Excluded
means, you can select all devices
except maximum three devices.
Selection, All, Excluded
Buzzer
Switching of the buzzer.
The buzzer can also be target in the
MasterBus events, if activated it sounds for
maximum 1 minute. See also section 6.3.
This means the buzzer can sound even if
you switched it off in the configuration.
On On,
Off
Auto Lock after
Time after which to lock the panel.
Off
Off, 2, 5, 10 minutes
Backlight
Choose the backlight colour. In alarm the
backlight turns red, if not red already.
White White,
Red
Power save
Backlight time
Time the display backlight stays illuminated
since the last button was touched.
2 minutes
always off,2 minutes,5
minutes,10minutes,always on
Auto off
Time after which the
MasterView Easy
will
be switched off since the last button touch.
1 day
1 day, 2 days,
always on
Backlight
Percentage of illuminance
50%
0-100%, in 10% steps
Favourites page
Name fav. page
Name of your Favourites page. -
Maximum
16
characters
Favourites page
Selection of areas to show.
Analogue
means, a bar is shown instead of a value.
no
No, analogue, 1,2,3,4,6 areas,
1-3 tanklevels
Connect to Fav
Connect to
Area to connect the next item to
Area 1
Area 1,2,3,4,5,6
Device
Device to add the monitoring item from
Select…
System dependent
Group no.
Group number in monitoring page selected
1
1-65535
Item no.
Item number in monitoring page selected
1
1-65535
Add
Add the item to the Favourites page
In
Connected favour., a
list of the added monitoring items for the chosen areas is shown. This list is read only in
user level.
6.2.1 Changing
of
characters
Changing of characters, for instance the yacht
name, is accelerated by keeping the up/down arrow
pressed. The characters change then in
second
gear
.
