14
WARNING!
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3)
BEFORE USING BLOWER.
WARNING!
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED.
WARNING!
KEEP BYSTANDERS CLEAR OF BLOWING DEBRIS.
WET/DRY VACUUM WITH TWO-STAGE MOTOR - 054-0241-8
BLOWER OPERATION
5
6
1
2
3
4
This Wet/Dry Vac has blowing capabilities. To use the blower feature, follow the instructions listed.
1. Check that the power cord is disconnected from the outlet. (Fig. 1)
2. Make sure the container is empty before using as a blower.
3. Remove the noise diffuser from the blower port. (Fig. 2)
4. Remove hose from the vacuum port and insert the locking end of the hose into the blowing port on
the power head and lock into position. (Fig. 3)
5. Fit the desired extension wand and/or nozzle to the free end of the vacuum hose. (Fig. 4)
6. Ensure the power switch is turned off and plug in the power supply. (Fig. 5)
7. Before turning on the vac, firmly hold loose end of the hose. Turn the motor on by flipping the switch
to the ‘I’ ON position or set switch to remote control setting and use the remote control. (Fig. 6)
