MasterSounds Radius 4, Руководство по эксплуатации

Страница: 5 / 10

3 - FRONT PANEL CONTROLS
MIC I/P SELECT
– The Radius 4 features two Microphone inputs on CH1 & CH2,
which are located on the rear panel, (see the MIC ON paragraph in the Rear
Panel Control section).
AUX
- The AUX send level pot adjusts the amount of channel signal level sent to
the Aux Mix Buss (and on to an external FX unit). Fully clockwise the signal level
is boosted by +10dBu, allowing for precise adjustment of FX signals.
PRE - The PRE button switches the Aux send feed from Post Fader to Pre Fader
(i.e. set to Pre Fader it will still send to the Aux Mix Buss with the rotary fader
down).
TRIM - The TRIM pot adjusts the input signal level from OFF up to a maximum of
+10dBu, enabling accurate level matching between different musical sources.
LINE/RIAA - This toggle switch selects either the RIAA (Phono) level input in its
top position, or the LINE input in the bottom position.
HPF - HPF stands for “High Pass Filter”. The HPF is 12dB per octave and can be
swept from 15Hz to 2kHz by turning the rotary pot clockwise. The HPF is a great
performance tool and has been designed to sound natural, aiding smooth mixing.
CUE - Each CUE button routes the channel signal to the headphones. Pressing the
Cue button illuminates the red LED. When Cue buttons are activated you can
hear the selected Cue channels playing. When no Cue button is active the
headphone signal is automatically routed to the Master Mix Buss.