background image

5 - WARRANTY

 

 

MasterSounds warrants that the Mixer shall be free of defects in workmanship 

and materials for a period of twelve months from the date of purchase. In the 
event that the product fails to operate as intended, MasterSounds will repair or 

replace the product subject to the following conditions. 

 

1.

 

That the failure was not due to improper installation, operation, cleaning 
or maintenance, accident, damage, misuse, abuse, or non-approved 
modifications to the Mixer. 
 

2.

 

The warranty does not cover normal wear and tear or any other event, act, 
default or omission outside MasterSounds control. 
 

3.

 

Faulty products must be returned to MasterSounds or an authorised 
service agent along with the original invoice or proof of purchase, and the 
mixer must be returned packed in the original shipping box. Please contact 
MasterSounds before shipping a faulty unit. 
 

4.

 

The warranty applies only to the original purchaser and is not 
transferrable. 
 

5.

 

At their sole discretion, MasterSounds may either repair the defective 
product or replace with an equivalent service exchange item. 

 

6.

 

This warranty constitutes the purchaser’s sole remedy. MasterSounds 
shall not be liable for any other repair or replacement cost or any damage 
or loss directly or indirectly related to the malfunction of this mixer. 

 

MasterSounds RADIUS 4 complies with the European Electromagnetic 

Compatibility directives 2014/30/EU and the European Low Voltage 
directives 2014/35/EU. 

 

 

 
 
Radius 4 Operation Manual Issue 2 

Copyright © 2016 MasterSounds Audio. All rights reserved 
http://www.mastersounds.co.uk/ 

 

 

 

 

 

 

Содержание Radius 4











Отзывы: