MASTERPAC SG70, Руководство по эксплуатации

Страница: 11 / 23

11
OPERATION
2 Operation
2.1 Application
Rammers are designed to compact loose soils and gravel to prevent settling and
to provide a firm, solid base for the placement of footings, concrete slabs,
foundations, gas piping works, water pipe works and cable backfill works, etc.
Please do not use in such as following cases. It may cause damage
because machine is likely to be unbalanced.
 Pile foundation
 Hard soil excessively compacted over normal condition
 Steep bank slope
Tamping Rammer is to be used for compacting cohesive clay, gravels, and
patching work on asphalt, etc.
2.2 Structure
The upper part is made up of Power source, Clutch, Connecting Rod and Operating
Handle, Fuel Tank that connected via Shock Absorbing Rubber to body. Bottom end is
made up of Spring Cylinder (Sliding part), Foot Plate that ramps body, Foot and
Bellows that covers sliding part.
2.3 Before Starting
 This machine is of oil bath lubrication system.
 Check the oil level through a window at rear end of the foot. Replenish oil if oil is not
visible at the window. For lubrication, use automobile engine oil of 10W-30 SE, SF
or better grade. Capacity is 830cc.

Fill the fuel tank with regular gasoline (unleaded). Simultaneously, check engine oil
and make it a habit to replenish on the earlier side. Low lubrication oil level may
result in engine seizure due to consumption during operation. Nevertheless, oil
level should be checked prior to start up without fail. For lubrication, use automobile
engine oil of 10W-30 SE, SF or better grade. See Engine Operating Manual for
further detail.

Check every bolt, nut or screwed area for tightness. Loosened due to vibration
may result in unexpectedly serious trouble. Be sure to tighten any screwed
area.
 Remove dirt and dust. Particularly clean the vicinity of recoil starter and foot.
!
WARNING