5
SAFETY INFORMATON
function. Always check moving parts for proper alignment or binding. Check for broken parts and
mountings and all other conditions that may affect the operation of the power tool. A guard, or
any damaged part, should be properly repaired or replaced.
Always feed work into a blade or cutter against the direction of rotation. A blade or cutter should
always be installed such that rotation is in the direction of the arrow imprinted on the side of the
blade or cutter.
TURN POWER OFF -Do not leave a tool until it comes to a complete stop. Always turn a power
tool OFF when leaving the work area, or, when a cut is finished.
Hazard Symbols:
Never touch electrical wires or components while the engine is running. They can be
sources of electrical shock which could cause severe injury or burns.
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never
operate the engine with covers, shrouds, or guards removed.
Never tamper with the governor components or settings to increase the maximum speed.
Severe personal injury and damage to the engine or equipment can result if operated at
speeds above maximum.
Sawing and drilling generates dust. Excessive airborne particles may cause
irritation to eyes, skin and respiratory tract. To avoid breathing impairment, always employ dust
controls and protection suitable to the material being sawed or drilled. Diamond Blades improperly
used are dangerous.
