10
OPERATION
3. Operation
3.1 Operating Principle
The following instructions were compiled to provide you information on how to obtain long
and trouble free use of the unit. Periodic maintenance of this unit is essential. Read the
manual in its entirety and follow the instructions carefully. Failure to do so may injure
yourself or a bystander.
3.2 Delivery Checks
Immediately on taking delivery of your new equipment and before putting it into service.
l
Read the operation manual completely
—
it could save a great deal of unnecessary
expense.
l
Read the engine manual supplied.
l
Check the general condition of the equipment
–
has it been damaged during delivery?
l
Check engine oil level.
l
Check fuel levels.
Recommended lubricants are detailed in the Care and Maintenance section.
3.3 Before Starting
The following Pre-start-up inspection must be performed before the start of each work
session or after every four hours of use, whichever is first.If any fault is discovered, the
compactor must not be used until the fault is rectified.
1. Thoroughly inspect the compactor for signs of damage. Check components are
present and secure. Pay special attention to the belt drive safety guard fitted
between the engine and the vibrator unit.
2. Check the engine oil level and top up as necessary.
3. Check the engine fuel level and top up as necessary.
4. Check for fuel and oil leaks.
NOTICE:
Check the oil level in the engine and exciter. Engine and compactor warranties are
VOID if this unit is run without oil.
Содержание PC4012 Series
Страница 1: ......
