background image

 

 

SAFETY INFORMATON 

 

 

l

  ENSURE all operators read, understand and follow the operating instructions. 

l

  SERIOUS INJURY could result from improper or careless use of this machine. 

l

  Plate  compactors  are  heavy  units  and  should  be  positioned  by  two  people  of 

appropriate  strength.  Using  the  lifting  handles  provided  on  the  machine,  along 

with correct lifting techniques. 

 

! MECHANICAL HAZARDS 

 

l

  DO NOT operate the machine unless all protective guards are in place. 

l

  KEEP handles and feet clear of rotating and moving parts as they will cause injury 

if contacted. 

l

  ENSURE  that  the  motor  operation  switch  is  in  the  OFF  position  and  the  spark 

plug  ignition  lead  is  disconnected  before  removing  the  guards  or  making 

adjustments. 

l

  ENSURE  both  the  machine  and  the  operator  are  stable  by  setting  up  on  level 

terrain  and  the  machine  will  not  tip  over,  slide  of  fall  while  in  operation  or 

unattended. 

l

  DO NOT leave the machine in operation while it is unattended. 

l

  DO NOT pull the machine backward with transportation wheels, it only could be 

pushed forward. 

l

  ENSURE  that  the  walls  of  a  trench  are  stable  and  will  not  collapse  due  to  the 

action of the vibration, prior to commencing compaction. 

l

  ENSURE  that  the  area  to  be  compacted  does  not  contain  any 

live

  electrical 

cables,  gas,  water  or  communication  services  which  may  be  damaged  by  the 

action of vibration. 

l

  EXERCISE CARE when operating unit. Exposure to vibration or repetitive work 

actions may be harmful to hands and arms. 

l

  NEVER stand on the unit while it is operating. 

l

 

DO  NOT  increase  the  governed  no-load  motor  speed  above  3,500  r/min.  Any 

increase may result in personal injury and damage to the machine. 

l

  BE  CAREFUL  not  to  come  in  contact  with  the  muffler  when  the  engine  is  hot, 

since it can cause severe burns. 

l

  ENSURE  that  the  repairs  to  the  motor  and  machine  are  carried  out  by 

COMPETENT personnel. 

 

! FIRE & EXPLOSION HAZARDS 
 

l

  PETROL is extremely flammable and explosive under certain conditions. 

l

 

ENSURE that the petrol is only stored in an approved storage container. 

l

  DO NOT refuel the motor while it is in operation or hot. 

l

  DO  NOT  refuel  the  motor  in  the  vicinity  of sparks,  a  naked flame  or a  person 

smoking. 

Содержание PC4012 Series

























Отзывы: