MasterForce 260-9516, Руководство оператора

Страница: 9 / 12

Page 9
8. MAINTENANCE AND STORAGE
• Clean the clips and the case each time
you are finished using it.
• Charge battery to full capacity before
storage.
• Store this unit at the temperatures
between -4°F - +140°F (-20 ˚C - +60 ˚C).
• Store clips on their support posts, to
ensure they do not come into contact
with any metallic surface.
• Never completely discharge the inter-
nal battery.
• Charge after each use.
• Charge at least once every month, if
not in frequent use, to prevent over-dis-
charge.
• Coil the input and output cords neatly
when storing the charger. This will help
prevent accidental damage to the cords
and charger.
• Store the charger unplugged from the
AC power outlet in an upright position.
• Store the clamps on the storage areas
provided on the handle. Do not store
the clamps clipped together, on or
around metal, or clipped to the cables.
9. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The jump starter won’t
jump start my car. Clamps are not making a
good connection to the
battery.
Connections are reversed.
The jump starter’s battery
is not charged.
The vehicle’s battery is
defective.
The jump starter is not
turned on.
Check for poor connection
to battery and frame.
Make sure connection
points are clean.
Disconnect the jump
starter and reverse the
clamps.
Press the Battery Status
button on the front of the
unit. The LEDs will indicate
the status of charge.
Have the battery checked.
Press ON/OFF switch to
turn on the jump starter.
The jump starter will not
operate. Low temperature
protection. Use the USB adaptor to
charge and activate.
The battery in the jump
starter won’t hold a
charge. The battery is bad (will not
accept a charge). Have the battery checked.