MasterForce 241-0400, Руководство оператора

Страница: 24 / 26

24
Open the chuck jaws. Using a screwdriver, remove the chuck screw by
turning it in a clockwise direction.
Insert a 5/16-in. or larger hex key into the chuck of the drill and tighten the
chuck jaws securely.
Tap the hex key sharply with a mallet in a clockwise direction. This will
loosen the chuck for easy removal.
NOTE: The chuck screw has left handed threads.
Attach a new chuck to the spindle and tighten the chuck screw.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The drill/driver does not
work
Battery is depleted Charge the battery
Bit cannot be installed
Sleeve is not
released
Release the sleeve
Bit does not fit the
sleeve
Use suitable adapter
Motor overheating
Be sure cooling vents
are free from dust
and obstacles
Clean, clear vents. Do not
cover with hand during
operation
WARRANTY
If, during normal use, this MASTERFORCE
TM
power tool breaks or fails due
to a defect in material or workmanship within three years from the date of
original purchase, simply bring this tool and its sales receipt back to your
nearest Menards
®
retail store for a free equivalent replacement within those
three years.
The warranty:
(1) excludes expendable parts including but not limited to blades, bits, light