background image

15

CHARGING A HOT BATTERY PACk

If the battery pack is above normal temperature range, the red LED will 

illuminate and the green LED will be off. When the battery pack cools down 

to approximately 104°F (40°C), the charger will automatically begin charging.

CHARGING A COLD BATTERY PACk

If the battery pack is below the normal temperature range, the red LED 

will illuminate and the green LED will be off. When the battery warms to a 

temperature of more than 41°F (5°C), the charger will automatically begin 

charging.

DEFECTIVE BATTERY

If the charger detects a problem, the red LED will begin flashing and the 

green LED will be off. 
1.  If registering as defective, remove and reinsert the battery pack in the 

charger. If the LED status reads “defective” a second time, try charging a 

different battery pack.

2.  If a different battery pack charges normally, dispose of the defective 

battery pack (see Maintenance section).

3.  If a different battery pack also indicates “defective,” the charger may be 

defective.

BATTERY CHARGING

If the battery pack is within normal temperature range, the green LED will 

begin flashing and the red LED will be off. The battery pack will reach a full 

charge in 60 minutes (for included battery charger 252-8024). 

LED INDICATOR

BATTERY

PACK

Defective

Charging

Fully

charged

RED

LED

On

Off

Off

GREEN

LED

Off

Off

Flashing

Flashing

On

ACTION

Hot/cold

battery

DEFECTIVE

BATTERY

BATTERY

CHARGING

BATTERY

FULL

Battery pack or charger 

is defective.

Fast charge will begin when 

battery returns to 41°F (5°C) 

and 104°F (40°C).

Charging 

Charging is complete.

HI / LO TEMP.

Fig. 4

Содержание 241-0400



























Отзывы: