9
The pins on plug of extension cord are the same number, size and shape
as those of the plug on charger.
The cord is properly wired and in good electrical condition
The size is large enough for AC ampere rating of charger as specified
below:
The Cord Length (Feet) 25’ 50’ 100’
Cord Size (AWG) 16 16 16
NOTE:
AWG = American Wire Gauge
Do not operate the charger with a damaged cord or plug,
which could
cause shorting and electric shock. If damaged, have the charger repaired
or replaced by an authorized service technician at an approved Service
Center.
Do not operate the charger if it has received a sharp blow, been dropped,
or has otherwise been damaged in any way. Take it to an authorized
service technician at an approved Service Center for an electrical check
to determine if the charger is in good working order.
Do not disassemble the charger. Take it to an authorized service
technician at a Service Center when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or fire.
Unplug the charger from the electrical outlet before attempting any
maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use. This will
reduce the risk of electric shock or damage to the charger if metal items
should fall into the opening. It will also help prevent damage to the
charger during a power surge.
Risk of electric shock. Do not touch the uninsulated portion of output
connector or uninsulated battery terminal.
Save these instructions. Refer to them frequently and use them to instruct
others who may
use this tool. If you lend this tool to someone else, also
lend these instructions to them to prevent misuse
of the product and
possible injury.
