11
PRODUCT SPECIFICATION
Illumination source
Incandescent lamp
Run-time
more than 2 hours
Bulb power
18V DC 300mA
Pivoting head
90 degrees
Pivoting handle
130 degrees
Battery Voltage
18 Volt DC
Worklight Weight (without battery)
10OZ
Charger Input
120-Volts, 60 Hz AC only
ASSEMBLY
WARNING!
If any part is broken or missing, do not attempt to attach the bat-
tery or operate the worklight until the broken or missing part is replaced. Failure
to do so could result in possible serious injury.
WARNING!
Do not attempt to modify this worklight or create accessories not
recommended for use with this worklight. Any such alteration or modification is mis-
use and could result in a hazardous condition leading to possible serious injury.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the box. Make sure
that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred
during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any part is damaged or missing, please refer to the numbers listed on
the back page of operator’s manual.
PACKING LIST
Worklight, Operator’s Manual
