12
OPERATION
TO ATTACH BATTERY PACK (Fig. 2)
1. Align the raised portion on the
battery pack with the grooves on
the bottom of the worklight, and
then attach the battery pack to the
worklight as shown.
2. Make sure the latch on the battery
pack snaps into place and the battery
pack is secured to the worklight
before beginning operation.
TO DETACH BATTERY PACK (Fig. 2)
1. Press the latch located on the front of the battery pack to release battery
pack.
2. Pull forward on the battery pack to remove from the worklight.
ADJUSTING THE WORKLIGHT HANDLE AND HEAD
The worklight has a head and a handle that pivot independently for maximum
flexibility. The handle can pivot 130°and has three positive stops. The head
pivots 90°.
1. Press the handle pivot release button and move the handle to any of the
three positive stops. Do not force the handle beyond the 130°range.(fig.3)
2. move the head by manually rotating it into any position within the 90°. Do
not force the head beyond the 90°range.(fig.3)
Fig. 2
PUSH
PUSH
Fig. 3
Handle Adjusts 130°
Handle
Adjusts 90°
Pivot release button
