4
INTRODUCTION
The Console Drive controls the speed of MASTERFLEX
®
P/S
TM
Pump Heads to provide flow rates from 0.10 to
3400 mL/min or 0.001 to 54 gallons/hr.
Mount up to 2 MASTERFLEX P/S Pump Heads and all MASTERFLEX-compatible Pump Heads.
CONTROL/DISPLAY FUNCTIONS
Press keys to activate function. Use INC/DEC (
▲
,
▼
) arrow keys to correct/change a flashing display.
Press any key to enter new values.
A. DOWN ARROW (DECREMENT)
—Decrease value of a flashing display.
B. UP ARROW (INCREMENT)
—Increase value of a flashing display.
C. FLOW CONTROL
—Set flow rate for selected tubing size. To change flow rate, press
▲
or
▼
arrows.
(If pump is running, its speed will change with new settings.)
D. START/STOP
—Start/Stop motor.
E. PRIME
—Run pump at full speed to fill or clear lines.
F. TOTAL VOLUME
—Display cumulative dispensed volume.
G. DIRECTION
—To change motor direction.
H. MODE SELECT
—
INT
for internal control;
mA
for remote current control;
V
for remote voltage control.
I. UNITS
—Select between metric (milliliters and liters) and English (U.S. gallons) displayed units.
J. DISPENSE/COPY
—Select dispensed volume, copy volume, or the dispense/copy interval.
K. CAL CONTROL
—Refine built-in calibration using a measured volume.
L. TUBING SELECT
—Select tubing size.
A
B
C
D
E
F
L
K
J
I
H
G
Figure 1
Содержание P/S 850-3010
Страница 2: ...2...
